Properties of tin oxide films grown by atomic layer deposition from tin tetraiodide and ozone

• Kristjan Kalam,
• Peeter Ritslaid,
• Tanel Käämbre,
• Aile Tamm and
• Kaupo Kukli

Beilstein J. Nanotechnol. 2023, 14, 1085–1092, doi:10.3762/bjnano.14.89

• have been studied from many perspectives. For example, one can mention anodes for Li-ion batteries [1], gas sensors [2], catalytic activities [3], and stable buffer [4] or base [5] layers in solar cells. More applications can be found, when SnO2 is considered as constituent of a nanostructure or a

• nanocomposite layer. ZrO2–SnO2 stacked layers have been shown to perform as mechanically elastic and magnetizable films [6]. SnO2-coated carbon nanotubes have been studied as catalysts [7] and ZnO–SnO2 as functional composite in Li-ion batteries [8]. A recent review article from 2022 lists 27 different

Isolation of cubic Si₃P₄ in the form of nanocrystals

• Polina K. Nikiforova,
• Sergei S. Bubenov,
• Vadim B. Platonov,
• Andrey S. Kumskov,
• Nikolay N. Kononov,
• Tatyana A. Kuznetsova and
• Sergey G. Dorofeev

Beilstein J. Nanotechnol. 2023, 14, 971–979, doi:10.3762/bjnano.14.80

• precursor for diffusion doping of wafers and as anode material for Li-ion batteries. A similar method with a hydrogenation step offers the possibility to obtain other compounds, such as silicon selenides, arsenides, and sulfides. Keywords: ampoule annealing; defective zinc blende structure; DFT

• respect to the zinc blende structure. The expansion problem, however, is likely to be mitigated by the presence of interparticular voids, making the synthesized cubic Si3P4 nanocrystallites a prospective material for Li-ion batteries. Additionally, NPs may prove promising in the preparation of

• ) Si3P4 to be energetically favored [9][10][11][12][13][14]. The calculated lattice constant a and the ratio c/a lie within the ranges of 4.961–5.093 Å and 0.994–1.003, respectively. Among the properties of silicon-based materials, one may note a high specific capacity, which is crucial for Li-ion

Structural studies and selected physical investigations of LiCoO₂ obtained by combustion synthesis

• Monika Michalska,
• Paweł Ławniczak,
• Tomasz Strachowski,
• Adam Ostrowski and
• Waldemar Bednarski

Beilstein J. Nanotechnol. 2022, 13, 1473–1482, doi:10.3762/bjnano.13.121

• capable of reversibly intercalating lithium ions [2]. The commercialization of lithium-ion cells was achieved in the early 1990s by Sony Corporation and in 1992 by a joint venture company (Asahi Kasai and Toshiba) [2][3][4]. Almost 90% of commercial Li-ion batteries consist of a lithium cobalt oxide

• conversion devices, such as Li-ion batteries, solar cells, solid oxide fuel cells, and thermoelectrics. Unusual and unexpected properties and also unique microstructures (and shapes), such as high porosity, high surface area, short reaction pathways, and diffusion length for Li-ion transport, eventually

Role of titanium and organic precursors in molecular layer deposition of “titanicone” hybrid materials

• Arbresha Muriqi and
• Michael Nolan

Beilstein J. Nanotechnol. 2022, 13, 1240–1255, doi:10.3762/bjnano.13.103

• Li ion batteries or pseudocapacitance supercapacitors [31]. These films were also employed as coatings of nano Si electrodes and successfully improved their performance [48]. As described above, different titanicone and Ti–organic MLD processes have been developed and although first principles

Recent advances in nanoarchitectures of monocrystalline coordination polymers through confined assembly

• Lingling Xia,
• Qinyue Wang and
• Ming Hu

Beilstein J. Nanotechnol. 2022, 13, 763–777, doi:10.3762/bjnano.13.67

• networks, which could simultaneously provide mechanical strength and continuous pathways for ions. These networks worked well as solid-state electrolytes in Li-ion batteries. To assemble the coordination polymer particles into a 2D configuration, dip-coating deposition was employed [141]. The evaporation

Electrical, electrochemical and structural studies of a chlorine-derived ionic liquid-based polymer gel electrolyte

• Ashish Gupta,
• Amrita Jain,
• Manju Kumari and
• Santosh K. Tripathi

Beilstein J. Nanotechnol. 2021, 12, 1252–1261, doi:10.3762/bjnano.12.92

• , researchers have been developing polymer electrolytes (solid/gel) as an alternative to commercial liquid-based electrolytes which are suitable for electrochemical devices, such as Li-ion batteries, solar cells, fuel cells, and supercapacitors [1][2][3][4][5]. The main aim is to increase the amorphous content

Solution combustion synthesis of a nanometer-scale Co₃O₄ anode material for Li-ion batteries

• Monika Michalska,
• Huajun Xu,
• Qingmin Shan,
• Shiqiang Zhang,
• Yohan Dall'Agnese,
• Yu Gao,
• Amrita Jain and
• Marcin Krajewski

Beilstein J. Nanotechnol. 2021, 12, 424–431, doi:10.3762/bjnano.12.34

• obtained material was composed of loosely arranged nanoparticles whose average diameter was about 36 nm. The as-prepared cobalt oxide powder was also tested as the anode material for Li-ion batteries and revealed specific capacities of 1060 and 533 mAh·g−1 after 100 cycles at charge–discharge current

• area, which, surprisingly, revealed high rate capability and long cycle life as anode electrode material for Li-ion batteries. The obtained results are discussed in detail in the following sections of this work. Results and Discussion The structure of as-prepared Co3O4 powder was verified by XRD and

• techniques. It consisted of loosely arranged nanoparticles with an average diameter of about 36 nm and a specific surface area of about 3 m2·g−1. The Co3O4 material was also examined as anode material for Li-ion batteries. The obtained electrochemical results indicated that even though the synthesized

ZnO and MXenes as electrode materials for supercapacitor devices

• Ameen Uddin Ammar,
• Ipek Deniz Yildirim,
• Feray Bakan and
• Emre Erdem

Beilstein J. Nanotechnol. 2021, 12, 49–57, doi:10.3762/bjnano.12.4

• ]. Therefore, MXene-based composites have a promising future [16][17]. MXenes have been shown to be potential electrode materials both for Li-ion batteries and supercapacitors [20][21]. After the initial discovery, different researchers from all around the world have been combining efforts to synthesize MXenes

DFT calculations of the structure and stability of copper clusters on MoS₂

• Cara-Lena Nies and
• Michael Nolan

Beilstein J. Nanotechnol. 2020, 11, 391–406, doi:10.3762/bjnano.11.30

• on adsorption structures of Li at Se-doped MoS2, to study the suitability of the system for application in Li-ion batteries. Li adatoms prefer to adsorb above an Mo atom in the monolayer, and cause the system to become metallic once adsorbed. External strain was found to strongly modify the binding

Improvement of the thermoelectric properties of a MoO₃ monolayer through oxygen vacancies

• Wenwen Zheng,
• Wei Cao,
• Ziyu Wang,
• Huixiong Deng,
• Jing Shi and
• Rui Xiong

Beilstein J. Nanotechnol. 2019, 10, 2031–2038, doi:10.3762/bjnano.10.199

• materials. From insulating to semiconducting and conducting, TMOs exhibit wide-ranging electrical and magnetic characteristics that depend on their geometric structure, doping concentration and stoichiometry ratio [4]. TMOs have been used in many fields such as Li-ion batteries, electrochemical capacitors

• [7] and Li-ion batteries [8][9][10][11]. Like most TMOs, bulk MoO3 has a wide band gap (about 3.0 eV) and low electrical conductivity, which seems inappropriate for thermoelectric devices. However, the electrical properties (including band gap and conductivity) of MoO3 are strongly dependent on the

TiO₂/GO-coated functional separator to suppress polysulfide migration in lithium–sulfur batteries

• Ning Liu,
• Lu Wang,
• Taizhe Tan,
• Yan Zhao and
• Yongguang Zhang

Beilstein J. Nanotechnol. 2019, 10, 1726–1736, doi:10.3762/bjnano.10.168

• excellent service life. Li-ion batteries have successfully demonstrated their promise for a wide range of small-scale applications. However, the large-scale utilization of Li-ion batteries is limited by the energy density [1][2][3][4][5]. Recently, lithium–sulfur batteries (Li/S batteries) have been widely

Tuning the performance of vanadium redox flow batteries by modifying the structural defects of the carbon felt electrode

• Ditty Dixon,
• Deepu Joseph Babu,
• Aiswarya Bhaskar,
• Hans-Michael Bruns,
• Joerg J. Schneider,
• Frieder Scheiba and
• Helmut Ehrenberg

Beilstein J. Nanotechnol. 2019, 10, 1698–1706, doi:10.3762/bjnano.10.165

• energy sources during peak production and supply the stored energy to the grid during a depletion in the production. In this context, the all-vanadium redox flow battery (VRFB) is one of the most promising and flexible stationary electrical energy storage systems. Unlike Pb acid, Li-ion batteries or even

Upcycling of polyurethane waste by mechanochemistry: synthesis of N-doped porous carbon materials for supercapacitor applications

• Christina Schneidermann,
• Pascal Otto,
• Desirée Leistenschneider,
• Sven Grätz,
• Claudia Eßbach and
• Lars Borchardt

Beilstein J. Nanotechnol. 2019, 10, 1618–1627, doi:10.3762/bjnano.10.157

• these materials could also be extended to other energy storage systems such as Li-ion batteries or waste-water purification, wherever materials with a high surface area and improved wettability are required. Experimental Synthesis of N-doped carbon In a similar manner to [36][64], nitrogen-doped porous

Sub-wavelength waveguide properties of 1D and surface-functionalized SnO₂ nanostructures of various morphologies

• Venkataramana Bonu,
• Binaya Kumar Sahu,
• Arindam Das,
• Sankarakumar Amirthapandian,
• Sandip Dhara and
• Harish C. Barshilia

Beilstein J. Nanotechnol. 2019, 10, 379–388, doi:10.3762/bjnano.10.37

• commercial application as a gas sensor, transparent conducting electrodes, and catalyst [13][14][15]. SnO2 NSs have been used in several other areas such as sub-wavelength waveguide sensors [4], microelectronics [6], Li-ion batteries [16], and lubricants [17]. Oxygen vacancy related defects in SnO2

Improved catalytic combustion of methane using CuO nanobelts with predominantly (001) surfaces

• Qingquan Kong,
• Yichun Yin,
• Bing Xue,
• Yonggang Jin,
• Wei Feng,
• Zhi-Gang Chen,
• Shi Su and
• Chenghua Sun

Beilstein J. Nanotechnol. 2018, 9, 2526–2532, doi:10.3762/bjnano.9.235

• shows high reactivity due to the high ratio of lowly coordinated oxygen – a feature that has been employed for gas sensing and Li-ion batteries [21]. Now we turn to the experimental validation, starting with the synthesis of CuO nanowires (NWs) and CuO nanobelts (NBs) comprised of predominantly (001

Nitrogen-doped carbon nanotubes coated with zinc oxide nanoparticles as sulfur encapsulator for high-performance lithium/sulfur batteries

• Yan Zhao,
• Zhengjun Liu,
• Liancheng Sun,
• Yongguang Zhang,
• Yuting Feng,
• Xin Wang,
• Indira Kurmanbayeva and
• Zhumabay Bakenov

Beilstein J. Nanotechnol. 2018, 9, 1677–1685, doi:10.3762/bjnano.9.159

• they could provide strong binding sites to sulfur while simultaneously improving the conductivity of the electrode. We previously reported the synthesis of ZnO nanoparticles on NCNT as anode material for Li-ion batteries [13], and focused on the effect of NCNT on ZnO nanoparticles. A high concentration

• @NCNT have these advantageous properties for the use in Li-ion batteries. The discharge/charge potential profiles of the cell at various rates also confirm the excellent stability of the S/ZnO@NCNT composite cathode (Figure 11). The results show that there is only a slightly fading of the potential

Nanoscale electrochemical response of lithium-ion cathodes: a combined study using C-AFM and SIMS

• Jonathan Op de Beeck,
• Nouha Labyedh,
• Alfonso Sepúlveda,
• Valentina Spampinato,
• Alexis Franquet,
• Thierry Conard,
• Philippe M. Vereecken,
• Wilfried Vandervorst and
• Umberto Celano

Beilstein J. Nanotechnol. 2018, 9, 1623–1628, doi:10.3762/bjnano.9.154

• demands from modern society on autonomous electronics, such as portable devices, internet-of-things applications and implants [1]. A multitude of studies have already indicated that nanotechnology, nanostructured designs and nanocomposite materials will play an important role for future Li-ion batteries

• locally accumulate and deplete Li ions on/below the surface thus representing an interesting starting point towards the C-AFM-based analysis of electrochemical properties in mixed ionic–electronic conductors. These concepts can be extended to the other constituents of Li-ion batteries, such as the anode

Comparative study of sculptured metallic thin films deposited by oblique angle deposition at different temperatures

• Susann Liedtke,
• Christoph Grüner,
• Jürgen W. Gerlach and
• Bernd Rauschenbach

Beilstein J. Nanotechnol. 2018, 9, 954–962, doi:10.3762/bjnano.9.89

• cells [4][5][6] or Li-ion batteries [7][8]. Oblique angle deposition (OAD) [9][10][11] opens the opportunity to grow such films in an elegant and easy to handle way. During the OAD process, the substrate is tilted to an oblique incidence angle θ between incoming particle flux and normal of the substrate

Freestanding graphene/MnO₂ cathodes for Li-ion batteries

• Şeyma Özcan,
• Aslıhan Güler,
• Tugrul Cetinkaya,
• Mehmet O. Guler and
• Hatem Akbulut

Beilstein J. Nanotechnol. 2017, 8, 1932–1938, doi:10.3762/bjnano.8.193

• density of Li-ion batteries is desired in order to store more, efficient energy. Although researchers have made significant progress in the development of high capacity anode electrodes, such as SnO2 [2], Sn-Ni [3], and Si [4], the performance of cathodes has been bottlenecked by the energy density and

• capacity of Li-ion batteries. In commercial Li-ion batteries, LiCoO2, which has a specific capacity of 140 mAh/g, is used as the cathode material although it has many disadvantages such as high cost, toxicity and limited sources. Therefore, researchers have been developing different cathode materials such

• electrode particles from the micrometer to the nanometer regime can enhance the ion exchange rate in Li-ion batteries [15], while on the other hand, supporting the cathode with carbon materials such as carbon nanotubes, acetylene black and graphene, helps to improve the conductivity of the electrode. Among

Adsorption and diffusion characteristics of lithium on hydrogenated α- and β-silicene

• Fadil Iyikanat,
• Ali Kandemir,
• Cihan Bacaksiz and
• Hasan Sahin

Beilstein J. Nanotechnol. 2017, 8, 1742–1748, doi:10.3762/bjnano.8.175

• candidates as electrode materials for Li-ion batteries [39]. For applications in Li-ion batteries, a high coverage of Li atoms on a material is required. Due to its buckled large surface area, silicene seems to be a good candidate for Li-ion battery applications. Li adsorption on pristine silicene has been

• convenient or forbidden regions for Li atom diffusion. High binding energies and relatively low diffusion barriers for a Li atom on H-α-Si and H-β-Si suggest that hydrogenated forms of α- and β-silicene are suitable materials for Li-ion batteries. Top and side views of (a) H-α-Si and (b) its three different

Two-dimensional carbon-based nanocomposites for photocatalytic energy generation and environmental remediation applications

• Suneel Kumar,
• Ashish Kumar,
• Ashish Bahuguna,
• Vipul Sharma and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2017, 8, 1571–1600, doi:10.3762/bjnano.8.159

• of the most abundant elements on the earth. In the past two decades, carbon-based materials such as graphene, graphitic carbon nitride (g-C3N4), fullerenes and carbon nanotubes (CNTs) have been explored for various applications such as Li-ion batteries [22], supercapacitors [23], energy storage [24

Structural properties and thermal stability of cobalt- and chromium-doped α-MnO₂ nanorods

• Romana Cerc Korošec,
• Polona Umek,
• Alexandre Gloter,
• Jana Padežnik Gomilšek and
• Peter Bukovec

Beilstein J. Nanotechnol. 2017, 8, 1032–1042, doi:10.3762/bjnano.8.104

• cathode material of choice in rechargable Li-ion batteries. Under overcharge conditions Mn4+ is much more safer than Co4+ and Ni4+, which are thermally unstable at the top charge. Also, at higher energy densities and operation voltages, and in combination with organic flammable electrolytes and carbon

Photocatalysis applications of some hybrid polymeric composites incorporating TiO₂ nanoparticles and their combinations with SiO₂/Fe₂O₃

• Andreea Laura Chibac,
• Tinca Buruiana,
• Violeta Melinte and
• Emil C. Buruiana

Beilstein J. Nanotechnol. 2017, 8, 272–286, doi:10.3762/bjnano.8.30

• , Li-ion batteries, sensors, photodynamic cancer therapy or in biomaterials [1][2][3][4][5][6][7]. Since 1972, when Fujishima and Honda published their seminal work [8], much work has been focused on investigating the photocatalytic properties of TiO2 [9]. Titanium dioxide catalysts proved to be better

Effect of nanostructured carbon coatings on the electrochemical performance of Li_1.4Ni_0.5Mn_0.5O_2+x-based cathode materials

• Konstantin A. Kurilenko,
• Oleg A. Shlyakhtin,
• Oleg A. Brylev,
• Dmitry I. Petukhov and
• Alexey V. Garshev

Beilstein J. Nanotechnol. 2016, 7, 1960–1970, doi:10.3762/bjnano.7.187

• materials; Li-ion batteries; nanocomposites; nanostructures; Introduction LiNi0.5Mn0.5O2-based electrode materials [1] were proposed as a less expensive alternative to LiCoO2 for high energy density Li-ion batteries containing less toxic elements than cobalt. The reasonable combination of their

Microwave synthesis of high-quality and uniform 4 nm ZnFe₂O₄ nanocrystals for application in energy storage and nanomagnetics

• Christian Suchomski,
• Ben Breitung,
• Ralf Witte,
• Michael Knapp,
• Sondes Bauer,
• Tilo Baumbach,
• Christian Reitz and
• Torsten Brezesinski

Beilstein J. Nanotechnol. 2016, 7, 1350–1360, doi:10.3762/bjnano.7.126

• galvanostatic charge–discharge tests and ex situ X-ray absorption near edge structure spectroscopy, the as-prepared zinc ferrite nanocrystals can be used as a high-capacity anode material for Li-ion batteries, showing little capacity fade – after activation – over hundreds of cycles. Overall, in addition to the

• further corroborated by density functional theory calculations [51][52]. As mentioned above, spinel ferrites can, in principle, be used as negative electrode materials in rechargeable Li-ion batteries. However, they have been shown to undergo conversion at low potential and these electrochemical reactions